|Model||WLL kg*||Jaw (Z) Capacity mm||A mm||B mm||C mm||D mm||E mm||F mm||G mm||H mm||I mm||Weight kg**|
|92-500||50 – 500||0 – 16||99||195||29||33||47||50||48||11||15||1.5|
|92-1500||100 – 1500||0 – 20||126||225||50||49||70||82||55||13||20||3.0|
|92-2000||200 – 2000||0 – 32||192||312||80||75||96||100||81||20||24||8|
|92-300||300 – 3000||0 – 32||192||320||80||75||96||100||81||30||30||12|
This clamp is primarily used for transporting sheet metal and steel plates in the vertical position, as well as lifting and turning through 180°.
This clamp can also be used for transporting steel constructions and profiles. It is recommended to use a pair of plate clamps in conjunction with a spreader beam for large sized sheets and long materials which have a tendency to sag.
The jaw can be opened and closed with the locking lever (except for the TBL 0.5 t which uses a positive spring loaded cam). The safety lock overrides the spring-loaded cam, preventing the clamp from opening even when there is no load.
These plate clamp are service-friendly, making it easy to exchange parts, which are available individually or in kits. Clamp repair is available, or can be done by competent person.
The plate surface of the material must have a hardness level below HRC 30/Brinell 300.
Please Note! All units are supplied as standard with a hook ring. Link fitting and chain are available on request as a special order.
No techincal data available for this product.