Camlok Rail Pulling clamps, ranging from 1500kgs to 5000kgs


Camlok Rail Pulling Clamp, model RP.  designed to be used for positioning lengths of rail and designed to fit most standard rail sizes.  1500kgs – 5000kgs.  Models numbers: RP1.5, RP3.0, RP5.0.

Please choose your product type from the drop-down menu below. To check product measurements where available, please click a diagram image to the left and compare to the specification table below.

Clear selection
SKU: N/A Categories: ,

Product Description


Model Number of Rails WLL kg Weight kg
RP1.5 1 1500 6
RP3.0 1 3000 8
RP5.0 1 5000 13


The RP rail pulling clamps are designed to be used when positioning lengths of rail.  They have been designed to fit most standard rail currently in use.  To pull your length of rail you simple place the clamp over the head of the rail, at the end and tighten the threaded bar (by hand) until it is clamped on the rail web.

Once clamped to the rail you are ready to use by attaching the hook of your chain directly on to the shackle at the top of the clamp and begin pulling.

To release, simply unscrew the threaded bar and lift clamp from the rail.

The units shown are the industry standard.  Other sizes are available upon request.  Please contact a Durham Lifting’s Team for details.

*Chain and lifting hook are not included as standard.


RP Technical Data – Click here

Additional Information


6, 8, 13